Home
when radio is on air you can tune in by clicking on the Peppies-Jukebox link on the top of the page (members only) and by leaving it open you can browse the site content and join in with stuff all at the same time or if you join us you can join us in the irc channel to see whats being played, make requests and join in with us there too. 
It doesn't matter if you have the 20GB, 60GB, or even the new 80GB PlayStation 3--you can always use more storage space. All that available harddisk space quickly disappears once you start downloading games, demos, and HD videos. Fortunately, Sony has designed the PS3 to allow console owners to perform their own hard drive upgrades. You can go out and select your own hard drive instead of being forced to buy an official first-party harddisk accessory. However, giving console owners that freedom means aspiring upgraders will need to know how to select the right hard drive upgrade and the proper installation technique.
[You must be registered and logged in to see this image.]
Harddisk manufacturer Seagate supplied us with a 160GB Momentus 5400.3 for our upgrade.
The first step to replacing the harddisk is going to the store or visiting an online retailer to pick up a new harddisk. The PS3 is compatible with just about any 2.5-inch SATA notebook harddisk. The physical size of the harddisk is important because it has to fit the PS3's 2.5-inch drive tray. As far as storage capacity goes, it doesn't make sense to go through the trouble of upgrading unless you go big: We're talking 120GB, 160GB, or even 250GB.
Once you have your upgrade drive, the next step is to backup the data on your current PS3 hard drive to an external storage unit. You can skip this step if you aren't attached to your music, videos, and game saves, but most of us will probably want to save all that information. The PS3 has a built-in software backup utility that can copy the PS3's hard drive contents to an external storage device, such as a USB thumb drive or a Memory Stick. The removable storage device must use the FAT32 file system in order for the PS3 to recognize it. If you have an external hard drive that's formatted in NTFS, you can use the Disk Management utility in Windows to reformat the drive, but you'll need to create partitions on large external hard drives because Windows can do only FAT32 on drives 32GB or smaller.
[You must be registered and logged in to see this image.]
Save your data using the PS3's backup utility.
If your storage device isn't large enough to handle a full system backup, you can selectively copy data over through the various music, photo, and game menus in the XMB. Your PlayStation Network login and system settings will remain safe on the system during the entire process. After you have your data safely backed up, you can move on to the actual hard drive swap.
You will need a Phillips-head screwdriver to complete this part of the installation process. The PS3 owner's manual also includes step-by-step details on how to replace the hard drive, in case you need more instructions.
[You must be registered and logged in to see this image.]
Turn off and unplug the system. Remove the plastic HD side panel, and remove the blue screw.
[You must be registered and logged in to see this image.]
Open the metal latch, move the drive tray to the right, and slide out the drive.
[You must be registered and logged in to see this image.]
Remove the four screws that hold the hard drive to the tray. Use a screwdriver that fits snugly because the screws are extremely tight and easy to strip.
[You must be registered and logged in to see this image.]
Swap in the new drive, and replace the screws.
[You must be registered and logged in to see this image.]
Put the drive tray back into the system and slide it into place. Then replace the blue screw and snap the side panel back onto the system.
[You must be registered and logged in to see this image.]
Turn on the console and let the system format the new drive. Then load up the PS3 backup utility to restore data from your external storage device back onto the PS3 hard drive.
At this point you should have a newly upgraded PS3 and the leftover hard drive. You could try selling the old drive, but small-capacity used drives may not fetch enough money to be worth the hassle of finding a buyer. If you still want to make the drive useful, you can buy an external drive enclosure to make it into a portable storage device.
[You must be registered and logged in to see this image.]
Harddisk manufacturer Seagate supplied us with a 160GB Momentus 5400.3 for our upgrade.
The first step to replacing the harddisk is going to the store or visiting an online retailer to pick up a new harddisk. The PS3 is compatible with just about any 2.5-inch SATA notebook harddisk. The physical size of the harddisk is important because it has to fit the PS3's 2.5-inch drive tray. As far as storage capacity goes, it doesn't make sense to go through the trouble of upgrading unless you go big: We're talking 120GB, 160GB, or even 250GB.
Once you have your upgrade drive, the next step is to backup the data on your current PS3 hard drive to an external storage unit. You can skip this step if you aren't attached to your music, videos, and game saves, but most of us will probably want to save all that information. The PS3 has a built-in software backup utility that can copy the PS3's hard drive contents to an external storage device, such as a USB thumb drive or a Memory Stick. The removable storage device must use the FAT32 file system in order for the PS3 to recognize it. If you have an external hard drive that's formatted in NTFS, you can use the Disk Management utility in Windows to reformat the drive, but you'll need to create partitions on large external hard drives because Windows can do only FAT32 on drives 32GB or smaller.
[You must be registered and logged in to see this image.]
Save your data using the PS3's backup utility.
If your storage device isn't large enough to handle a full system backup, you can selectively copy data over through the various music, photo, and game menus in the XMB. Your PlayStation Network login and system settings will remain safe on the system during the entire process. After you have your data safely backed up, you can move on to the actual hard drive swap.
You will need a Phillips-head screwdriver to complete this part of the installation process. The PS3 owner's manual also includes step-by-step details on how to replace the hard drive, in case you need more instructions.
[You must be registered and logged in to see this image.]
Turn off and unplug the system. Remove the plastic HD side panel, and remove the blue screw.
[You must be registered and logged in to see this image.]
Open the metal latch, move the drive tray to the right, and slide out the drive.
[You must be registered and logged in to see this image.]
Remove the four screws that hold the hard drive to the tray. Use a screwdriver that fits snugly because the screws are extremely tight and easy to strip.
[You must be registered and logged in to see this image.]
Swap in the new drive, and replace the screws.
[You must be registered and logged in to see this image.]
Put the drive tray back into the system and slide it into place. Then replace the blue screw and snap the side panel back onto the system.
[You must be registered and logged in to see this image.]
Turn on the console and let the system format the new drive. Then load up the PS3 backup utility to restore data from your external storage device back onto the PS3 hard drive.
At this point you should have a newly upgraded PS3 and the leftover hard drive. You could try selling the old drive, but small-capacity used drives may not fetch enough money to be worth the hassle of finding a buyer. If you still want to make the drive useful, you can buy an external drive enclosure to make it into a portable storage device.
